PORSCHE 911 TURBO ELE
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released a their new sytem of exhaust design with x-cellerator cross-flow exhaust system. The cross flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the center of the muffler. Als...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$1,822.50
Make a selection
Agency power has developed a selection of products that set the standards for Porsche turbo tuning. All new, the agency power Porsche 996tt 997tt headers fit the 2001 and up turbo vehicles. Made from 321 stainless steal, the headers are complete polished. Flanges are laser cut for a precision fit. Each header features a highly engineered collector to keep your turbo spooling faster then stock while creating additional horsepower and torque. Tested on a 2001 996tt with factory k16 turbos, these headers added almost 10 wheel horsepower. as tested on a 997tt, the headers gained almost 20 ft/lbs of torque.
In addition to improving performance, the headers also change the tone of your vehicle. Adding a deeper so...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08
$1,249.95
Make a selection
More air = more power! Ipd plenum's patented, cast aluminum "y" style plenum increases horsepower and torque by optimizing airflow into the intake manifold. The factory plastic "t" style intake creates airflow turbulence, which deprives the motor of air, robbing hp and torque. Ipds "y" style plenum smoothly channels the airflow towards the left and right cylinder banks. The engine receives a larger mass of air at a higher velocity, which equates to increases in hp and torque across the entire rev range. The end result is improved acceleration and increased boost response (on turbo vehicles). Ipd plenum's provide dyno proven results and are a simple and cost effective way to increase power. Want more pow...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $1,045.00
Make a selection
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
turbo back exhaust sy...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,190.08
Make a selection
For all 993 turbo and GT2
- 19kw (25ps) more power
- larger pipe guide (75mm)
- expanded at the pipe diameter and exit (20% more).
- up to 75% less backpressure
The OEM system has at its narrowest point only 55 mm pipe guide.
Our system is at the narrowest point 20% (64mm) larger.
Whats in the box:
2 x headers with heat ducts
2 x 200 cell trimetal catalytics
2 x rear mufflers
2 x Ø90mm end tips oval
1 x mounting kit
FVD exhaust systems carry a 2 year warranty!
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1994-98
$10,794.30
Make a selection
"brombacher" 996 tt (sound version) stainless steel exhaust system
Facts:
- + 30 crank hp & + 22 crank torque
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s sep...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,873.20
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5"(90mm/80mm) tips and are made for this muffler. Kindly order bes 996 060 41s separately.
Figures:
Gen...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,947.80
Make a selection
Tips only fit with complete FVD Brombacherturbo systems.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 TURBO/GT2 2001-05
$1,024.10
Make a selection
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-5000rpm
Max. Speed - 310km/h (193mph)
Max. Rpm -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$9,909.90
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
"brombacher" titanium exhausts are the absolute last word in exhausts for the 997 GT2.
Incredible performance and aggressive sound all in a lightweight titanium system. The system as shown increases performance 25hp and weighs just 25.5 lbs for a huge weight savings in the already heavy rear of the 911.
From the turbo flanges and catalytics (available in 100 or 200 cells), to the tailpipes (Ø 2x85mm), this entire exhaust system (excluding the cells themselves) is made entirely of titanium. The 4 chamber system design reduces the drone in the cabin while retaining a deep, throaty growl unlike other 2 chamber systems from the competition. Our system is designed using the most expensive and highest heat v...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$12,395.90
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Brombacher 997.2 tt "sport stock" (TUV version) muffler for OEM cats
Facts:
- + 6 crank hp & + 5 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 3 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:the 99...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
Brombacher 997 tt (TUV version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software)**
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90/100mm) tips and ar...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,980.80
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Vehicles which were delivered without the Porsche® sport exhaust (pse) will need this kit for installation. It includes all of the vacuum lines and electronics needed to upgrade your exhaust to a valved system.
What?s in the box:
- electronic control module.
- wiring harness.
- vacuum valve and vacuum lines.
- vacuum box with support.
- open / closed button.
- mounting hardware.
Fits: GT2 rs, 3.6l, 456kw (11-), GT2 (08-09), turbo (07-09), speedster, 3.8l, 300kw (10-), Carrera GTS4, 300kw (12-), Carrera GTS2, Carrera 4s, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 rs (04-), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (0...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 2009-12 911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08
From $842.70
Make a selection
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
Sport rear silencer fo...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,923.08
Make a selection
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
Sport rear silencer fo...(choose a part on the right to read more)
General Fitment 911 1989-94
$1,774.58
Make a selection
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
Stainless steel sport ...(choose a part on the right to read more)
General Fitment 911 1994-98
Brombacher 997.2 tt "cat-back" (sound version) muffler for OEM cats
Facts:
- up to 25 crank hp & + 25 crank torque**
- reuses stock cats, perfect for those concerned about warranty.
- open muffler design for added power.
- tubing diameter is the same as the OEM system.
- weighs 19 lbs. (8,6 kg)
- t 316 stainless steel for improved durability over t 304.
- 5 on a scale of 1-10 in volume (1 being stock).
- includes cone and v band style hardware to prevent exhaust leaks.
- made in Germany.
- modular design for future 100 cell, 200 cell or bypass use.
- more distinguished growl at idle, partial throttle and wide open throttle.
- dme programming not necessary.
- reuses OEM tips.
**please note:t...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$2,805.00
Make a selection
K-16/24 turbo (up to 555hp)
Power is focused on low and mid range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software
FVD brombachers 996 k-16/24 new turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This is done to replace the factory compressor wheel with a larger, mo...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,686.76
Make a selection
Endless ewig mx-72 front brake pads Porsche 993 turbo 93-97
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
The mx72 is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without abs. The mx72 is a high heat...(choose a part on the right to read more)
General Fitment 911 1989-94
Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound.
Features:
turbo back exhaust sy...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11
$5,190.08
Make a selection
Endless ewig mx-72 front brake pads Porsche 996 turbo 3.6l 01-05
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
The mx72 is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without abs. The mx72 is a high...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 2005-08
Endless ewig mx-72 rear brake pads Porsche 964 turbo 91-92
Endless develops high performance brake solutions for the most demanding competition usage from wrc rally teams, british touring cars, australian v8 touring cars and much more, for short sprint races to extreme endurance races. In addition to the range of competition brake pads, endless has also developed a range of high performance street pads which will also let you tackle track work with ease.
The mx72 is a ceramic-carbon-metallic compound, which is developed for fast road cars to be used at high speed driving with repeated braking and acceleration. It is suited for use in a power brake system with or without abs. The mx72 is a high heat ...(choose a part on the right to read more)
General Fitment 911 1989-94
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|